THE DIFFERENCE IS IN THE DETAILS

LUXURY FEATURES AND FINISHES

Our commitment to leading-edge design and construction innovation allows us to create homes of the highest calibre, offering today’s most desired features and finishes.

  1. Architecturally designed homes in traditional and transitional architecture, as per elevation. House siting and exterior colour package selections are architecturally controlled.
  2. Exterior Elevations
  3. Corner lot flankage elevations to receive enhanced architectural details, as per architectural control.
  4. 2” x 6” exterior stud walls with OSB wall sheathing.***
  5. Engineered roof systems with raised heel trusses.
  6. Prefinished “maintenance free”* aluminum soffits, fascia, eaves troughing and downspouts (as per elevation).
  7. Premium manufacturer’s limited lifetime shingles as per plan.
  8. Wood and steel beam construction.
  9. Engineered floor joist system for all subfloors, not including landings.
  10. 5/8” premium engineered OSB tongue & groove subfloor, nailed, glued , screwed and sanded.***
  11. 3/8” plywood or 7/16” OSB roof sheathing, Vendor’s choice.***
  12. Poured concrete foundation walls.
  13. Precast patterned patio slabs from driveway to front porch as per approved grading and/or site plan. Front & rear door(s) to receive precast concrete patio step(s) where site grading requires.
  14. Ceiling heights – Approximately 8’0” ceilings in basement, 9’0” ceilings on ground floor and 8’4” ceilings on second floor.***
  15. Entry-resistant framing on all perimeter doors.
  16. Thermopane exterior metal French door(s) “no screen(s)” and / or vinyl sliding patio door(s) “with screen(s)” as per plan.
  17. Concrete garage floor with reinforced grade beams.
  18. Garage interior to be finished with drywall taped (1 coat) and primed.
  19. PEX (Cross-linked polyethylene) hot and cold water lines throughout.
  20. All homes to be “Grey Water Ready”.
  1. “Maintenance free”* thermopane Energy Star® qualified coloured vinyl casement windows (coloured windows as per the exterior colour packages approved by the Controlling Architect) on all elevations (including rear). Muntin bars within the panes of glass on front elevation only, as per plan.** All windows to be double glazed with low emissive coating, argon filled gas and insulated spacer bars for greater energy cost savings. All operable windows to have screens. Some decorative windows have fixed glass panes.
  2. All exterior door(s), windows and building perforations are foam insulated and fully caulked.
  3. Insulated metal door from garage into house, as per plan. ** The Vendor reserves the right to substitute the door from the garage to the house with a wall if grade difference exceeds 2 or 3 risers depending on the house plan and zoning bylaw restrictions.
  4. Where applicable, and at the Vendor’s discretion, the floor at the garage entry door may be dropped up to 2 risers to accommodate the entry door(s), as per plan.
  5. Thermopane exterior metal French door(s) as per plan (screen not included).**
  1. 200 AMP service with circuit breakers and copper wiring throughout.
  2. Heavy-duty cable and outlet for stove and dryer.
  3. One waterproof exterior electrical outlet at rear, one at the front porch, one outlet on a separate circuit in the garage and one switch controlled outlet at the front porch soffit for holiday lighting (location of outlets determined by Vendor).**
  4. Outlet in garage ceiling for future installation of each garage overhead door opener (opener not supplied by Vendor). One per garage door.
  5. All electrical outlets and light fixtures located within all perimeter walls and second floor ceilings are installed in sealed boxes.
  6. Ceiling fixtures in foyers, hallways, mudroom, office, living room, family room, laundry, kitchen, servery, walk-in pantry, recreation room, breakfast area, media room, all bedrooms, bathrooms and walk-in closets with energy efficient LED bulbs (min 75% of home) with Vendor supplied fixtures as required by code.**
  7. Switch controlled capped ceiling outlet provided for future dining area light fixture, as per plan.
  8. All electrical switches and outlets to be white Décora.
  9. Prewired for television (RG6 cable) and telephone (CAT5e cable) in primary bedroom, family room, office and media.**
  10. All rough-in outlets as noted for TV, telephone, data/voice/video cabling to be left as non-terminated wiring.
  11. Electronic smoke detectors on all levels of the home and in all bedrooms. Carbon monoxide detectors on all levels.
  12. Front entry door chimes.
  13. Electrical outlet provided below counter within kitchen island and/or peninsula cabinet, as per code (only applicable on the island when the island is permanently fixed, as per plan).**
  14. One rough-in for future power supply for electrical vehicle, including conduit and electrical box located in garage.***
  1. Upgraded R31 expandable spray foam insulation to garage ceiling and exterior overhangs where there are livable areas above.
  2. Exterior walls insulated to R22. R60 insulation in attic space above living areas.
  3. Electronic programmable thermostat centrally located on main floor, at Vendor’s discretion.
  4. Power vented Energy Star® qualified gas fired hot water tank, on a rental basis.
  5. Hot water tank and one or more mechanical components on a rental basis with designated supplier at Vendor’s sole discretion.
  6. High-efficiency, Energy Star® qualified forced air gas furnace with ductwork sized for central air conditioning. Location and orientation may vary at Vendor’s discretion without notice.**
  7. Air conditioner included.
  8. All homes to be equipped with one HRV (Heat Recovery Ventilator) paired with furnace.
  9. All exposed mainline metal ductwork joints in basement are sealed.
  10. Ducts professionally cleaned and sanitized. (Purchaser supplied with certificate which is to be redeemed within 3 months from date of closing).
  11. Direct vent gas fireplace, no hearth, as per plan.
  1. Energy Star® qualified exhaust fan in laundry room; applies only if no operating window is present in the laundry room.
  2. Exterior venting for dryer in laundry room.
  3. Stand alone or Single basin laundry tub set in a base cabinet with 2 handle faucet, as per plan.
  4. Second floor laundry rooms only, to have tiled baseboards, floor drain and marble threshold, as per plan.**
  5. Optional upper cabinets in laundry room, as per plan.**
  6. “Oatey” box (or equivalent) recessed in the wall of finished laundry rooms in the vicinity of the washer to facilitate ease of connection of the washing machine hot and cold water lines as well as the drain.
  7. Stacked or side-by-side Washer and Dryer in white, as per plan, supplied and installed
  1. Interior walls to be painted with 2 (two) coats of off-white premium latex paint, 1 (one) coat prime plus 1 (one) coat finish.
  2. All interior doors and trim to be painted with (2) two coats of white premium latex paint, one (1) coat prime and one (1) coat finish.
  3. Interior door height standard approximately 6’ 8”, as per plan.
  4. Smooth ceilings throughout the ground floor, excluding closets, cloak rooms & walk-in pantries, which will receive stipple spray ceilings without smooth borders.
  5. Smooth ceilings in second floor hallways, bathrooms, laundry rooms & media rooms.
  6. Sprayed stipple ceilings with 4” smooth borders in second floor bedrooms, and closets.
  7. Raised tray ceiling in the primary bedroom with smooth painted finish inside the tray ceiling, as per plan.**
  8. Cathedral, raised, vaulted and arched ceilings as per applicable plan.**
  9. Trimmed archways as per plan.**
  10. Natural finish oak staircase in finished areas including nosing, posts, pickets, handrails, treads, risers, and stringers selected from Vendor’s standard samples.
  11. All closets including linen and walk-in pantries to have white vinyl coated wire shelving.
  12. Trim to be approx. 5¼” baseboards and 2¾” casing in all finished areas, as per plan.**
  13. Interior pewter or brushed nickel finish door levers and door hardware (hinges painted), Vendor’s choice.
  14. Privacy locks on primary bedroom and bathroom doors.
  1. Valance moulding under the kitchen uppers, as per plan (electrical not included).
  2. Kitchen cabinetry with hardware, as per plan. Colour matched kick plates.**
  3. Granite countertops in kitchen and servery, as per plan.
  4. Kitchen servery with base cabinet, as per plan.**
  5. Kitchen uppers to receive crown moulding at the top of the uppers, as per plan.**
  6. Kitchen cabinetry to have extended upper cabinets, as per plan.**
  7. Full depth fridge gable(s) with deep upper cabinet above fridge space, as per plan.
  8. Ceramic tile backsplash in kitchen & servery, from Vendor’s standard samples as per plan.
  9. Split electrical outlets provided above the kitchen countertop and dedicated outlet for the refrigerator.
  10. Pantry, Island, or Work Island with Extended Breakfast Bar (some extended breakfast bars to have legs), as per plan.**
  11. Double stainless steel undermount sink in kitchen, with single handle pulldown kitchen faucet.
  12. Stove exhaust hood fan in cabinet (stainless steel) with light, vented to exterior, supplied, and installed.
  13. Dishwasher rough-in includes electrical and plumbing, as per plan.
  1. 33” stainless steel front Energy Star® qualified refrigerator with bottom mount freezer, supplied and installed.
  2. 30” stainless steel front self-clean smooth top electric range, supplied and installed.
  3. 24” stainless steel front dishwasher, supplied and installed.
  1. Bathroom cabinetry with hardware. Colour matched kick plates as per plan. **
  2. Granite countertop in primary ensuite, as per plan. Post formed laminate countertops in powder room and bathrooms, as per plan.**
  3. Pedestal sink in powder room, as per plan.**
  4. Primary ensuite with double sinks as per plan.**
  5. Washerless single lever water efficient faucet(s) in all bathroom vanities with pop-up drains.**
  6. Bathroom fixtures to be white.
  7. Primary ensuite to have free-standing acrylic tub, with integrated single lever and handheld water efficient Roman faucet, as per plan.**
  8. Primary ensuite separate shower stalls, where applicable, to be finished with clear glass panels and half panels (as per design), chrome frame complete with clear glass shower door, as per plan (ceiling not tiled) and a waterproof recessed ceiling light.**
  9. Primary ensuite shower with one (1) piece marble slab seat, as per plan.**
  10. Secondary bathrooms which feature a separate shower stall, where applicable, to have waterproof interior recessed ceiling light and to be fully tiled not including the ceiling, as per plan. Chrome framed glass shower door, as per plan.**
  11. Ceramic wall tiles in tub enclosures, where applicable, to height of dropped ceiling (ceiling not tiled).
  12. Mirrors in all bathrooms with wall mounted lighting above the mirror.
  13. Energy Star® qualified exhaust fan in all bathrooms.
  14. Pressure balance bathtub and shower faucets in all bathrooms, where applicable, for safety and comfort.
  15. Moisture resistant tile backer with built-in moisture barrier in shower stall and tub enclosure, as per plan.
  16. Energy efficient water saver showerhead and toilet tanks.
  1. Choice of 12” X 12” or 13” x 13” ceramic tile in the foyer, cloak room, kitchen, servery, breakfast, mudroom, walk-in pantry, lower entry, all bathrooms and laundry room from Vendor’s standard samples, as per plan.**
  2. Torly’s laminate pre-finished flooring*** on the ground floor, second floor hallways, media rooms & mid-height landings from Vendor’s standard samples, as per plan.**
  3. Purchasers’ choice from Vendor’s standard 35oz Berber with ¼” high density chip foam underpad*** or 40oz polyester broadloom with 12mm standard foam underpad*** in all second floor areas except for tiled and laminate areas, as per plan. Choice of colours from Vendor’s standard samples (one colour throughout).
  1. Two (2) water taps with inside shut-off valves. One (1) in garage and one (1) at the back of the house, located at Vendor’s discretion.
  2. Front and rear yard to be fully sodded except for hard surface areas, as per plan. Side yard to be sod or gravel, at vendor’s discretion, as per plan.
  3. Two stage asphalt driveway, as per plan (Driveway consisting of base coat and top coat).
  4. Where rear ‘lookout basement’ conditions are applicable, the following features are standard and included in any premiums applicable to the lot: the wood deck off the main floor will be approximately 5’ x 10’ at minimum, complete with stairs to grade and oversized casement window(s) on the rear basement wall, layout as per Vendor’s Architectural recommendations; balance of standard size windows to be vinyl sliders. Where “walkout basement” conditions apply, the following features are standard and included in any premiums applicable to the lot: sliding patio door, oversized casement window(s), additional brick or siding, framing, insulation on rear wall of basement and a wood balcony approximately 5’ x 10’ at minimum off main floor rear sliding patio door or French door (no stairs), as per plan, additional exterior light fixture and electrical outlet. On lots with walkout or lookout grading conditions, the number of basement windows and location of basement windows may change, as per Vendor’s Architect’s recommendations.***,**
  1. All selections, including upgrades, are to be made from Vendor’s samples.
  2. Geranium has been registered with Tarion Warranty Corporation since 1985 and is in good standing. A completely computerized customer service program is available for a period of one year after closing. The following three inspection forms are to be submitted to the Vendor’s Head Office: A pre-delivery inspection form to be completed with the Vendor prior to closing. A second inspection form submitted a maximum of 30 days following the closing date. A final year end inspection form submitted anytime between a maximum of 30 days prior to and up to the one-year anniversary of the closing date.
  3. Tarion coverage: One (1) year warranty on defects in workmanship and materials. Two (2) year warranty on electrical, plumbing and heating delivery and distribution system, water penetration through building envelope and foundation. Seven (7) year warranty on major structural defects. Purchaser agrees to pay Tarion enrolment fee on closing date.
  4. Geranium-built homes with inspection, evaluation and qualifications conducted by 3rd party Evaluator.
  5. In accordance with the Agreement of Purchase and Sale, the Vendor shall have the right to substitute other products and materials for those listed in this Schedule or provided for in the plans and specifications provided that the substituted products and materials are of a quality equal to, or better than, the products and materials so listed or so provided.
  6. Vendor’s samples are subject to natural variations in colour and grain. Floor and wall tiles, all countertops, laminate flooring, kitchen cabinets, vanity cabinets and wall finishes are subject to pattern, shade and colour variations.
  7. Hardwood floors: Purchaser(s) are advised that the normal installation practice, as recommended by the hardwood manufacturer, is to install the hardwood perpendicular to the floor joists. Since not all floor joists run in the same direction throughout the home, the Purchaser(s) acknowledge and accept that the hardwood will not all run in one direction but will be installed as per the hardwood manufacturer’s recommendation. The Purchaser accepts this method of installation.
  8. Lighting: Purchaser(s) acknowledge and accept that due to construction and installation of framing members (lumber), plumbing pipes and HVAC systems, the location of ceiling electrical rough-ins and/or light fixtures and/or smoke and CO detectors may not be ‘centered’ within the ceiling space of any particular room(s).
  9. Eco-laminate flooring may react to normal fluctuations of humidity levels by producing gapping or cupping, both of which shall be considered acceptable. The Purchaser(s) acknowledge that failure to maintain a standard humidity level in the home may result in excessive gapping or cupping, for which the Vendor shall not be responsible.
  10. Smooth Ceilings: Purchasers are advised that due to the factory finish of gypsum drywall panels and the conventional methods of concealing joints and fasteners, certain conditions may detract from the quality of the “smooth” finish to the ceilings. Conditions involving a combination of lighting (both natural and electrical) and glossenamel or high-gloss paint may reveal shadows which will accentuate the slightest surface variation across the face of the panel. These surface variations in colour and sheen may affect the quality of the finished product and will likely be most visible where there are treated joints, fastener heads or corner beads. The Vendor and its contractors and subcontractors are hereby released from and shall not be responsible for making any associated repairs to the ceilings once they have been painted. Nail pops will be evident in the drywall surface as the home and framing members in the roof trusses dry out. These nail pops will only be repaired in accordance with Tarion guidelines.
  11. Ceiling heights will be less than the stated ceiling height where ceiling bulkheads are installed and where dropped ceilings are required.
  12. If the home is at a stage of construction which will enable the Vendor to permit the Purchaser(s) to make colour and material choices from the Vendor’s standard samples, then the Purchaser(s) shall have until the date designated by the Vendor to properly complete the Vendor’s colour and material selection form.
  13. The Vendor shall have the right, in its sole discretion, to construct the Dwelling either as shown on the Plans or to construct such Dwelling on a reverse mirror image plan, including reversal of the garage siting and reversal of the interior floor plan layout.
  14. The Purchaser(s) acknowledge that there shall be no reduction in the price or credit for any standard feature listed herein which is omitted at the Purchaser’s request.
  15. References to model types or model numbers refer to current manufacturer’s models. If these types or models shall change, the Vendor shall provide an equivalent model.
  16. Wall locations are approximate and walls or portions of walls may be furred out, or have a vertical box installed or altered to accommodate structural and/or mechanical requirements.
  17. All specifications, products and materials shall be from Vendor’s standard samples and are subject to change without notice.
  18. Pursuant to the Agreement or this Schedule, or pursuant to a supplementary agreement or purchase order the Purchaser(s) may have requested the Vendor to construct an additional feature within the home which is in the nature of an optional extra (such as, by way of example only, a fireplace); if, as a result of building, construction or site conditions within the home or development, the Vendor is not able to construct such extra, then the Vendor may, by written notice to the Purchaser(s), terminate the Vendor’s obligation to construct the extra. In such event, the Vendor shall refund to the Purchaser(s) the monies, if any, paid by the Purchaser(s) to the Vendor in respect of such extra, without interest and in all other respects this Agreement shall continue in full force and effect and the Vendor shall have no further obligation or responsibility to the Purchaser(s), whatsoever, in respect thereof.
  19. All natural stone samples shown at the Décor centre/sales office may vary from the product received from the manufacturer for installation. The Purchaser(s) acknowledge and accept that the manufacturing process can result in differences in finish, colour, texture, veining and after decorative attributes of the natural stone product. The Vendor does not warrant the consistency of these attributes and reserves the sole and absolute discretion to install the natural stone product.

*“Maintenance Free” means as per manufacture’s stated representations in respect of each particular product, and the Vendor does not make any representation or offer any warranty in respect thereof.
**Availability determined by house design.
***Specifications, sizes and finishing details are approximate and subject to change without notice.

To Top

Contact Agent

D-Jannetta

David Jannetta Sales Representative

Hours of Operation:
By Appointment
Model Home and Sales Office:
1296 Carson Rd. Barrie, ON L4M 4S5
Email: midhurstvalleysales@geranium.com
Phone: 437-288-8404

*By completing and submitting this form, you consent to receiving e-mail and marketing communications from Geranium.

CONTACT SALES REP.
CLOSE